All construction testing services
MATTEST performs laboratory and field quality control for all main construction materials and structures. Select a category below — you will find test methods, applicable standards, scope and work procedure.
- 01Hardened concrete and concrete mix
Compressive strength on cubes and cores, pull-off testing, non-destructive testing, mix testing before placement.
GOST 10180, 22690, 17624, 24332 - 02Laboratory soil testing
Grain size distribution, moisture content, density, compaction coefficient, mechanical properties.
GOST 12536, 5180, 22733 - 03Field soil and foundation testing
Plate load tests, dynamic penetration, in-situ density and compaction coefficient at the site.
GOST 20276, 19912, 5180 - 04Pile testing
Static compression and uplift, lateral load, ultrasonic integrity (CSL), seismic integrity (PIT).
GOST 5686, GOST R 71039, PNST 804, ASTM D5882 - 05Crushed stone (aggregate)
Crushability, grain size distribution, frost resistance, abrasion resistance, fines content.
GOST 8269.0, GOST 8267 - 06Sand
Grain size distribution, density, moisture, silt and clay content.
GOST 8735, GOST 8736 - 07Asphalt concrete and road materials
Compaction, mix composition, mix design, comprehensive pavement testing.
GOST 12801, GOST 9128, GOST R 58406 - 08Steel and welded joints
Mechanical testing, ultrasonic testing of welds, radiography, tensile testing of rebar.
GOST 1497, 10922, 12004, 14782, ISO 6892, ASTM E8 - 09Brick, blocks, stone
Compressive strength, dimensional check, density, frost resistance.
GOST 8462, 379 - 10Waterproofing and roofing materials
Adhesion of protective coatings to concrete, key properties of mastics and membranes.
GOST 28574, 26589 - 11Road bitumen and mineral filler
Penetration, ductility, softening point, grain size of mineral filler.
GOST 33133, 32761
Why laboratory testing matters
For a developer — proof of compliance with project and standards. For a design engineer — validation of calculation parameters. For technical supervision — independent quality confirmation. For an owner — confidence that construction meets the specification.
Every MATTEST test report contains: sample or structure identification, the test method used, applicable GOST or O‘z DSt reference, measured values and comparison with project requirements.